Wood chippers are powerful tools for processing branches and yard waste,but jams can occur when feeding in overly large,tangled,or wet materials.Handling a jam improperly can lead to injury or damage.Follow this guide to address the issue safely and effectively.
Immediate Safety Steps
1.Turn Off and Unplug:Immediately shut down the wood chipper.For electric models,unplug the power cord.For gas models,turn the ignition key to"off"and remove it,or disconnect the spark plug wire to prevent accidental startup.
2.Wait for Complete Stop:Allow all moving parts,especially the engine flywheel and feed mechanism,to come to a full and complete stop.Do not rush this step.
3.Use Lockout/Tagout:If available,use a lockout device on the power source.This is a critical safety step,particularly in work environments.
The Clearing Process
Tools You'll Need:
•Heavy-duty work gloves
•Safety glasses
•A long,sturdy piece of wood(like a 2x2 or a dedicated"chipper tool")
•A pry bar or strong stick
•A tarp or bucket for debris
Step-by-Step Procedure:
1.Clear the Discharge Chute:Often,a jam starts at the exit.Wearing your gloves and safety glasses,first clear any clogged material from the discharge chute using your long piece of wood.Never use your hands or feet.
2.Reverse the Feed Mechanism(If Equipped):Many modern chippers have a hydraulic or mechanical reverse function.Consult your owner's manual.If your model has this,engage reverse for a few seconds to back the jammed material out toward the hopper.
3.Clear the Feed Hopper from the Top:
◦If reverse doesn't work,carefully inspect the feed hopper.
◦Using your long pry bar or stick,try to break up and pull the jammed material straight back up and out the way it entered.Work from the side,keeping your body out of the direct line of the chute.
◦Never reach into the feed chute beyond where you can see.
4.Access the Cutting Chamber(Last Resort):
◦This step should only be attempted if the above methods fail and you are confident and able.
◦Refer to your manual for instructions on safely accessing the cutting assembly.This may involve removing a bolted access panel or housing.
◦Once open,use your wooden stick or a specialized tool to carefully dislodge the jam.The cutter blades are extremely sharp.Maintain a safe distance and never place your hands near them.
5.Remove All Debris:After clearing the jam,ensure all fragments of wood,twine,or other materials are removed from the hopper,cutting chamber,and discharge chute before considering restarting.
Common Causes of Jams&Prevention
•Overfeeding:Feeding too fast or too much at once.Fix:Feed branches steadily and slowly.
•Wet/Green or Stringy Wood:Soft,pliable,or fibrous material(like palm fronds,ivy,or fresh pine boughs)can wrap and clog.Fix:Chip dry,seasoned wood when possible,and mix in problem materials sparingly with brittle brush.
•Dull Blades:Blades that tear instead of slice can cause buildup.Fix:Sharpen or replace blades as recommended in the manual.
•Foreign Objects:Rocks,metal,or rope hidden in brush.Fix:Inspect all material before feeding.
Critical Safety Reminders
•Never,under any circumstances,use your hands,feet,or a short tool to clear a jam while the machine is running or plugged in.
•Always assume the machine can start unexpectedly.Secure the power source.
•Wear appropriate Personal Protective Equipment(PPE):safety glasses,hearing protection,gloves,long pants,and sturdy shoes.
•When in doubt,or if the jam seems severe,stop and consult a professional repair technician.Your safety is more important than saving time.
By following these systematic and safety-first steps,you can effectively clear a wood chipper jam and get back to work with minimal downtime and,most importantly,without injury.Always prioritize the guidelines in your specific model's owner's manual above general advice.
What Should I Do If The Wood Chipper Gets Jammed?
Apr 25, 2026
Leave a message






