The materials that can be processed by large-scale wood crushing facilities include commonly seen waste wood, discarded furniture, discarded wooden boards, leftover wood scraps from wood processing, tree trunks, etc. These materials are discarded raw materials that are no longer used, and wood chips are processed and recycled according to the wood crushing system. The use of this wood chip is also quite common, and it can be made into biomass for power plant combustion or domestic fuel through biomass pellet machines. It has a high application rate, is conducive to storage, and is hygienic; It can also be used for edible mushroom cultivation, papermaking, etc., providing a better raw material foundation for the job.
The large-scale wood crusher facility has a reasonable self planning and can withstand high-intensity impact loads. In the process of use, various factors such as hammering and collision may cause wear or deformation of spare parts, which is also difficult to avoid. So how to prevent the frequency of replacement of such spare parts? Now let me introduce to everyone:
Large wood crusher
1. When adding materials, always maintain an average size, and the particle size of the material should be based on its hardness. The diameter of hard materials should not exceed 3 centimeters, and it is strictly prohibited for metal hard objects to enter the discharge port.
2. During the application process, the motor load should not be overloaded and normal operation should be maintained.
3. Regularly check the wear sequence of the blades and grinding plates. If the blades and grinding plates are found to be unevenly worn, they should be replaced regularly.
4. When the edges and corners of the hammer blades of a large wood crusher are worn, they can be replaced and turned around four times. High chromium welding rods can be used to repair the weight.
The wood crusher requires regular maintenance and upkeep. If there are any problems, you will truly realize how crucial regular maintenance and upkeep are.
