22HP Diesel Hydraulic Disc Wood Chipper

22HP Diesel Hydraulic Disc Wood Chipper

The SIVFORX DWC-22 is the diesel-powered heavy-duty wood chipper in our lineup. Driven by a 22HP diesel engine, it features a disc-type cutting system with a hydraulic auto-feed, delivering 150 mm maximum chipping capacity. Diesel power brings three inherent advantages: exceptional fuel economy (30%–40% lower fuel consumption vs. equivalent gasoline engines), superior low-end torque (maintains RPM through hardwood without bogging down), and extended engine life (reinforced diesel architecture with overhaul intervals 2–3× longer than gasoline).
Send Inquiry
Description
Technical Parameters

Product Overview

 

The SIVFORX DWC-22 is the diesel-powered heavy-duty wood chipper in our lineup. Driven by a 22HP diesel engine, it features a disc-type cutting system with a hydraulic auto-feed, delivering 150 mm maximum chipping capacity. Diesel power brings three inherent advantages: exceptional fuel economy (30%–40% lower fuel consumption vs. equivalent gasoline engines), superior low-end torque (maintains RPM through hardwood without bogging down), and extended engine life (reinforced diesel architecture with overhaul intervals 2–3× longer than gasoline). The proven disc flywheel + hydraulic feed combination ensures fine, uniform chip quality with single-operator efficiency.


Mounted on a 165/70R13 tire trailer chassis with a 600 kg curb weight - the heaviest machine in the lineup - the DWC-22's mass translates directly to stability. The industrial-grade frame structure is built for years of high-intensity continuous operation. The DWC-22 is the ultimate diesel-powered chipping solution for diesel-preferred markets (Africa, Middle East, South America, Southeast Asia), commercial landscaping companies, biomass processing plants, and large-scale farms.


Founded in 2012, SIVFORX has shipped over 15,000 units to 30+ countries worldwide.


Key Highlights: Diesel Power | Ultra-Low Fuel Consumption | Disc Cutting | Hydraulic Auto-Feed | 600kg Industrial-Grade Chassis

 

Product Specifications

 

Item

Specification

Brand

SIVFORX (Since 2012)

Model

DWC-22

Engine

22 HP Diesel Engine

Start Method

Electric Start

Drive System

Belt Drive

Max Feed Diameter

150 mm (approx. 5.9 in)

Cutting System

Disc Type

Blade Configuration

2 Moving Blades + 1 Fixed Blade

Feed System

Hydraulic Auto-Feed System

Tire Specification

165/70 R13

Net / Gross Weight

600 kg / 660 kg (approx. 1,323 / 1,455 lbs)

Fuel Type

Diesel

Fuel Consumption

Approx. 1.5–2.5 L/h (varies by load - far lower than equivalent gasoline)

Chipping Efficiency

Approx. 5–8 m³/h (varies by wood type and diameter)

Trailer Chassis

Single-axle heavy-duty trailer with front jack-stand wheel + rear stabilizer leg

Warranty

Engine: 1 year / Frame & Structure: 2 years

 

Key Features

 

Diesel Power - Thrifty, Torquey, Long-Lived
The DWC-22's diesel engine delivers three game-changing advantages:
Ultra-Low Fuel Consumption:
●30%–40% less fuel than equivalent gasoline engines. At 6 hours/day, that translates to thousands in annual fuel savings.
Low-End Torque:
●Diesel's inherent high-torque-at-low-RPM character maintains stable cutting RPM through the toughest hardwood. 150 mm material feeds through without bogging.
Extended Service Life:
●Reinforced diesel architecture, lower operating RPM, and reduced wear deliver overhaul intervals 2–3× longer than gasoline - dramatically lower total lifecycle cost.
Safer Fuel:
●Diesel's high flash point and low volatility make storage and transport significantly safer than gasoline - critical for hot climates and remote field operations.

 

Disc Cutting - Premium Chip Quality
The large-diameter disc flywheel generates massive rotational inertia for smooth, consistent cutting force. With 2 moving blades + 1 fixed bed knife, chip output is fine, uniform, and low in dust - ideal for biomass pellet feedstock and landscape mulch applications.

 

Hydraulic Auto-Feed - Let the Machine Do the Work
Hydraulically driven feed rollers automatically grip and pull material into the cutting chamber at a controlled rate. Simply place the branch in the hopper - the machine handles the rest. Adjustable feed speed with auto-reverse overload protection. Single-operator efficiency, zero manual pushing.

 

Belt Drive - Built-In Overload Protection
Engine power transfers to the cutting disc via a multi-groove V-belt system. The belt slips automatically under excessive resistance or foreign object jams, protecting both engine and disc from impact damage. Quick, inexpensive belt replacement.

 

600kg Industrial Chassis - Mass Equals Stability
At 600 kg curb weight, the DWC-22 is the heaviest machine in the lineup. That mass delivers rock-solid stability - even when chipping large-diameter hardwood, the machine stays planted and steady. 165/70R13 large-size tires ensure safe, stable highway towing. Front jack-stand wheel and rear stabilizer leg lock the machine in place during stationary operation.

 

Electric Start - One-Key Diesel Ignition
The 22HP diesel comes standard with electric start. Preheat, then one-key ignition - professional, effortless, no hand-cranking required.

 

Gasoline vs. Diesel - Why Go Diesel?

 

Aspect

Diesel DWC-22

Gasoline GS200

Fuel Economy

Excellent (30%–40% savings)

Standard

Low-End Torque

Strong (high torque at low RPM)

Requires higher RPM

Engine Longevity

Long (2–3× overhaul interval)

Standard

Fuel Availability

Diesel widely available (agricultural/industrial)

Gasoline widely available

Fuel Safety

High (high flash point, low volatility)

Moderate

Purchase Cost

Slightly higher

Slightly lower

Machine Weight

600 kg

~450 kg

Best For

Diesel-prevalent markets (Africa, Middle East, etc.)

Gasoline-convenient markets

 

Choose Diesel DWC-22 if you: prioritize long-term operating cost, operate in diesel-accessible regions, and need maximum uptime with minimum fuel expense - the commercial/industrial choice.

 

Applications

 

Africa & Middle East Markets - Diesel is King
In regions where diesel is abundant and gasoline is relatively expensive or intermittently available, the DWC-22 is the natural first choice. Diesel engines are simpler, more tolerant of fuel quality variation, and easier to maintain - perfectly suited to local operating environments.
 

Commercial Landscaping & Large Municipal Projects
High-volume daily continuous chipping fully leverages diesel's low fuel consumption and long service life advantages. Hydraulic auto-feed enables single-operator management, dramatically reducing labor costs.
 

Biomass Pellet & Fuel Processing Plants
Disc-cut uniform chip quality plus stable, controllable hydraulic feed speed make the DWC-22 the ideal front-end processor for biomass operations. Diesel power lowers per-unit raw material processing cost, improving overall production line profitability.
 

Large Farms & Forestry Operations
Farms and forestry bases typically maintain on-site diesel storage (shared with tractors and agricultural machinery). The DWC-22 integrates directly into existing fuel supply chains - no separate gasoline procurement needed.
 

Remote & Off-Grid Operations
Diesel's safer storage characteristics and low volatility make it ideal for remote job sites far from fuel stations where self-supplied fuel is necessary. The 600 kg heavy-duty chassis tows more stably over rough terrain.

 

Technology & Craftsmanship

 

Diesel Engine:
●Industrial-grade diesel with reinforced block and crankshaft, engineered for sustained high-load operation. Mechanical fuel injection system - no reliance on electronic components, lower failure rate, simple field maintenance.
Disc Flywheel:
●Large-diameter heavy-gauge steel plate, laser-cut and dynamically balanced. Resharpenable blades for low long-term operating cost.
Hydraulic Feed System:
●Engine-driven hydraulic pump → flow control valve → hydraulic motor → feed rollers. Fully mechanical hydraulic circuit for rugged reliability. Infinitely variable feed speed, auto-reverse on overload.
Belt Drive:
●Multi-groove V-belt transmission with adjustable tension. Inherent slip protection eliminates need for additional clutch maintenance.
Heavy-Duty Chassis:
●Reinforced heavy-gauge welded steel frame, 600 kg curb weight. Three-layer protective finish (sandblasting + epoxy primer + polyurethane topcoat) for weather-resistant durability.

 

Customization Services

 

Customization Item

Available Options

Brand / Logo

OEM decals & nameplate

Machine Color

Standard industrial orange / Custom color

Engine Brand

Optional Changchai / Weichai / Yanmar / Kubota diesel engines

Emission Standard

Configurable per destination (EPA / EU Stage V, etc.)

Trailer Options

Road lighting kit, spare tire carrier, tool box, braking system optional

Discharge Chute

Standard rotatable / Extended discharge tube

Additional Features

Hour meter, digital feed speed display, LED work light, remote kill switch

Packing Customization

Steel frame / Fumigation-free crate / Bulk wrap / Custom shipping marks

Multi-Language

Manuals & decals in multiple languages

 

Why Choose the DWC-22 Diesel Chipper?

 

Diesel Saves Money:
1. 30%–40% lower fuel consumption than equivalent gasoline. At 1,800 operating hours/year, fuel savings alone can equal the machine's purchase price.
Diesel Delivers Torque:
2. High torque at low RPM. Maintains cutting speed through hardwood. 150mm capacity with confidence.
Diesel Lasts Longer:
3. Overhaul interval 2–3× longer than gasoline engines. Minimal total lifecycle cost.
Diesel is Safer:
4. High flash point, low volatility. Safer storage and transport - worry-free remote field operation.
Industrial-Grade Chassis:
5. 600 kg curb weight. Rock-steady during chipping. 165/70R13 tires for safe, stable highway towing.
Disc + Hydraulic Feed:
6. Premium uniform chip quality + single-operator efficiency. The gold-standard configuration.

Get in Touch
For pricing, live demo videos, or to schedule a factory visit, contact us today.
SIVFORX DWC-22 - Diesel Power. The Savings Add Up.

 

Hot Tags: 22hp diesel hydraulic disc wood chipper, China 22hp diesel hydraulic disc wood chipper manufacturers, suppliers, factory