Rusting of the wood chip machine can lead to blade passivation and decreased work efficiency, and if not repaired, this situation will become increasingly severe. How to prevent rusting of woodworking machinery has attracted the attention of many users now. Let's solve this problem together.
1. The working and setting environment of the wood chip machine have become the focus of attention, and then we can identify the rusting issues that everyone is concerned about. After all, rust affects the quality of equipment. The reason for equipment rusting may be due to production, production costs, and waste, resulting in significant damage and maintenance costs.
2. Rust prevention of wood chip machine refers to the process of painting, inspecting and repairing the equipment as required after it is pulled out of the warehouse, equipped with a grinder, and anti-corrosion agents that meet the requirements of all contacts listed. If the flywheel is removed from the eccentric shaft, ensure that the contact between the shafts is coated with anti-corrosion agent. During factory storage or seasonal shutdowns, grinders and disassembled parts should be stored in sturdy supports to prevent contact with the ground. The wood chip machine should be operated for at least five minutes per month to ensure the stability of the bearings. If the circuit breaker cannot be operated, the flywheel should be manually rotated 3-4 times during storage to ensure the accuracy and smoothness of the bearings. If necessary, add smooth bearing grease for use.
We know that rust not only affects the normal use of the wood chip machine, but also causes maintenance costs, so we can improve this situation by applying preservatives and maintaining it in a timely manner during use. After use, do a good job of maintenance, clean the blades and protect the body, and use them repeatedly before they can be used normally.
