In recent years, with the continuous increase in social demand, the sales of tree crushers have also doubled. In order to facilitate customers to timely grasp the problems that are prone to occur in the application of tree crushers, the following are examples of simple problems with tree crushers and provide solutions.
1. What should we do if the output decreases
The decrease in production indicates that the blade may be dull. Simply replace the blade and remove it, then polish it with a grinder to make it shiny; The lifespan of the blade is relatively long and can be recycled until the edge is worn out.
2. What should be done if the rolling bearing overheats
Tight transmission belts, damaged rolling bearings, or unbalanced motor rotors and bent shafts can all cause overheating of rolling bearings. What should we do to solve it? Adjusting the tightness of the drive belt, adding and replacing engine oil, and replacing motor rotors, shafts, and rolling bearings can all be attempted.
3. How to solve the obvious vibration of equipment
The spindle bearings of the machine tool are damaged or bent; The foot connecting bolt is loose; Hammer installation error; Excessive weight error between two sets of hammers can cause significant vibration wear. Install the error factory maintenance hammer component using a face turning hammer, and take correct measures to install the crusher hammer blade to maintain the balance of the motor rotor.
4. Loose or broken fan blades:
When the auxiliary fan blades loosen, the product fineness will suddenly become wider and have significant fluctuations. At this time, the wood crusher body has a slight swing and should be shut down for inspection and processing in a timely manner.
