1. Moderately increase the vertical return air duct of the drum type tree slicer: The middle vertical return air duct on the cyclone storage device should be moderately raised, but it is necessary to ensure that the particle size of the powder meets the standard. If the middle vertical return air duct is too high, it will interfere with the production volume, and if it is too low, it will cause pipeline blockage. Smoke and dust settle from the first return air duct, and the water vapor in it sticks the smoke and dust to the pipe diameter, reducing the pipe diameter and causing airflow circulation to be obstructed, affecting production volume, and the motor is prone to overheating. The solution is to handle the opening window of the pipe diameter on time.
2. The vertical return air duct is combined with the cutting groove: The vertical return air duct on the drum type tree slicer is placed on the side according to the equipment design standards, and is often closed due to material obstruction, which interferes with ventilation and production volume. When considering dust prevention, it is converted to be combined with the cutting groove, perpendicular to the cutting port of the wood tree slicer, which solves the blockage.
3. Placing a circular spray ring also allows some residual air and small amounts of smoke to settle in the settling chamber through the return air inclined pipe. One circular spray ring can be placed at the inlet and outlet of the pipe to form mist like water and promote the settling of smoke and dust.
4. A fan is arranged at the rear of the sedimentation chamber: The sedimentation chamber is composed of multiple inclined walls, and the smoke and dust are induced to settle by the suction force of the fan. One exhaust fan is installed at the rear to discharge the residual water vapor and smoke, and then processed in the water tank. This not only ensures that the pipelines of the tree slicer are not blocked, but also provides a guarantee for dust removal at various local dust points.
5. Timely removal of sediment: The small amount of smoke and water vapor extracted by the fan is impacted by the wind and deposited on the water surface. This sediment must be removed and treated once a week.
The tree slicer has been widely used in various fields, mainly because it can crush some objects into small particles, making its use more extensive. Especially in the fields of food and agriculture, it holds a crucial position. Many farmers nowadays use small tree chippers when planting. With the application of this tree chipper, agricultural straw can be crushed and stored as feed for animals such as cows and sheep.
However, as the drum type tree slicer is an industrial equipment, it may be damaged during application, so it is necessary to have a certain understanding of the corresponding maintenance and upkeep methods. When performing maintenance, it is necessary to check the power connection status of the equipment, including the wiring status of the power supply. In addition, if the motor is not rotating during operation, it should be inspected accordingly.
In summary, when applying drum type tree chippers, in order to ensure their normal operation, it is necessary to have a certain understanding of the specific maintenance methods.
