In many cases, the fault analysis of biomass crushers can also be determined by using the fault method. Different faults have different characteristics. The heat generated during the application of biomass crushers must be carefully examined.
When such problems occur, friction sound will be generated during the operation of the biomass crusher, and there will be significant shaking. At this point, the operator should turn off the equipment and disassemble the rolling bearings. Repair the friction part and then reinstall the rolling bearings of the biomass crusher equipment as needed.
In the operation process of the biomass crusher, please ensure that no other impurities that cannot be crushed are crushed. Equipment hammers should be avoided from forming sparks after being impacted by these impurities. On the other hand, it should be avoided that these materials that cannot be crushed will cause damage to the sieve plate after being crushed in the crushing chamber, which will affect the overall crushing effect. There is sufficient air volume to ensure that the air volume has a relatively high perforation rate of the sieve holes, which can improve the rate of using the sieve holes to remove the sieve plate for crushed materials, and sufficient air volume can separate crushed materials and impurities. The purpose of our improved feeding equipment is to allow the material to be crushed into the biomass crusher, in order to maintain the feed as evenly as possible and to maintain the relative stability between the equipment's production capacity and production current. And it is required to adjust the feed flow rate accordingly to ensure that the working current of the biomass crusher remains stable. From the work content of biomass crusher equipment, the mechanism of feeding equipment directly affects the crushing effect of the equipment.
In the face of such situations, first of all, we need to be able to correctly determine whether this is a normal condition or caused by a malfunction. This is crucial. This is related to our next operation on the biomass crusher.
What issues should be noted when adjusting a biomass crusher? Let me introduce to everyone below.
1. Before applying the new machine, the top cover should be opened to check the distance between the moving blade and the fixed blade. The optimal gap between the moving blade and the fixed blade is 0.2-0.3mm (There is an adjustment bolt at the cutting point).
2. Check if the bolts fixing the bottom of the screen mesh are loose, then lower the top cover and tighten the bolts.
3. The outer section of the main wheel and the power wheel must be on the same plane. After the belt is fastened, the tightness adjustment should be appropriate and not too loose or too tight.
4. Before starting, you can first flip the belt pulley by hand, and there should be no friction or impact during the flipping process. Only after it is normal can you start and check the working direction to produce normally. Therefore, it can be seen that the adjustment before the equipment is crucial. Customers who use biomass crushers must not be careless.
